BT 2150 manual Internal, Remove HS, To de-register a handset, To call another handset

The handset is automatically registered with the next available handset number. This number is shown on the display as HS 2, 3, 4 or 5.

Please note

If the registration process fails, the handset display shows Not SUB and you should begin the process again.

To de-register a handset

Press buttons in the order shown

To call another handset

Int	Press the INT button. Display
	shows the INT symbol and

Internal.

Enter the handset number you want. Display shows the number and the called handset rings.

Press the END button to end the call.

To transfer an external call to another handset

Options

Del

Options

PIN

You can use your handset to de-register another handset from a base station. You cannot de-register the handset you are using from the base station you are using.

Until display flashes Base setting.

Enter the 4-digit base station PIN, the pre-set PIN is 0000.

Int	Your caller is put on hold and
	you hear the dialling tone.

KEYPAD Enter the handset number to which you want to transfer the call. When the handset is answered

The call is transferred.

If the handset is not answered, press the INT button to speak to the caller again.

ADDITIONAL HANDSETS

Options

Del	Until the display shows
	Remove HS.
Options
Del	Until the handset number
	you want to de-register is
	flashing.
Options	To confirm.

You will hear a confirmation tone and the display will return to Remove HS.

42