To change between tone and pulse dialling
To set the external line access code
▲Press the UP button to select Base.
C OK | Press the OK button to confirm. |
▼Use the DOWN button to scroll to Base settings.
▲
▼
COK
▲
▼
COK
Press the UP or DOWN button to select Base.
Press OK.
Press the UP or DOWN button to select Base settings.
Press OK.
COK
▼
Press the OK button to confirm.
Press the DOWN button to scroll to
▲Press the UP or DOWN button to
▼ select Phone line.
COK
▼
Phone Line.
Press the OK button.
The display will show Line type.
Press the DOWN button to scroll to Dial type.
COK
▲
▼
COK
COK
Press OK.
Press the UP or DOWN button to select Prefix.
Press OK.
Press OK to select Prefix val.
Enter the switchboard external line
C OK | Press the OK button. |
▲Use the UP or DOWN button to
▼ | highlight either Pulse for pulse dialling |
access code, e.g. 9. You can enter codes up to 8 digits in length.
C OK | Press OK to store. |
or Frequency for tone dialling. |
C OK | Press the OK button to confirm. |
Switchboard external line access code
When you connect your telephone to a switchboard, you can set the switchboard’s external line access code so that when you make an external call using the handset directory, redial list or preparatory dialling, the code is automatically dialled before the number.
▲
▼
COK
COK
Now you must set the number of digits required to make internal calls to other extensions on your switchboard.
Press the UP or DOWN button to select Min.length.
Press OK.
Enter the number of digits to make an internal call to other extensions on your switchboard.
Press OK to store.
37
