On-Air 2300 SMS user guide ~ Edition 3.1 ~ 16th August ’02 ~ 4698

Introduction

Unpacking your BT On-Air 2300 SMS

If anything is missing, please contact your place of purchase immediately.

One BT On-Air 2300 SMS base.

One BT On-Air 2000 Executive handset.

One power supply for base station.

One telephone line cord.

One NiMH rechargeable battery installed pack and battery compartment cover.

One handset belt clip.

Three removable handset fascias.

Self adhesive label.

Four rubber feet.

Using SMS user guide

For your records

Date of purchase:

Place of purchase:

Serial number:

For guarantee purposes proof of purchase is required so please keep your receipt.

Enter your System Code here.

The pre-set System Code number is 0000. See page 20 for information on your System Code.

Enter your Remote Access Code here.

The pre-set Remote Access Code is 0000. See page 30 for more information.

Safety information

General

Only use the power supply included with the product. Using an unauthorised power supply will invalidate your guarantee and may damage the telephone. The item number for the mains power supply is 872101.

If Keyguard is active, it is still possible to make emergency calls to 999 and 112.

Do not open the handset or base station. This could expose you to high voltages or other risks. Contact the Helpline for all repairs.

Radio signals transmitted between the handset and base may cause interference to hearing aids.

It is recommended that advice from a qualified expert be sought before using this product in the vicinity of emergency/ intensive care medical equipment.

It is recommended that if you have a pacemaker fitted you check with a medical expert before using this product.

Never dispose of batteries in a fire. There is a serious risk of explosion and/or the release of highly toxic chemicals.

Cleaning

Simply clean the handset and base station with a damp

(not wet) cloth, or an anti-static wipe. Never use household polish as this will damage the product.Never use a dry cloth as this may cause a static shock.

Environmental

Do not expose to direct sunlight.

The product may heat up when the batteries are being recharged. This is normal. However, we recommend that you do not place the product on antique/veneered wood to avoid damage.

Do not stand your product on carpets or other surfaces which generate fibres, or place it in locations preventing free flow of air over it’s surfaces.

Do not submerge any part of your product in water and do not use it in damp or humid conditions, such as in bathrooms.

Do not expose your product to fire, explosive or other hazardous conditions.

There is a slight chance that your phone could be damaged by an electrical storm. We recommend that you unplug the power and telephone line cord for the duration of the storm.

6

Page 7
Image 7
BT manual Introduction, Unpacking your BT On-Air 2300 SMS, For your records, Safety information