Remote access
You can operate your answering machine from any external TouchtoneTM phone by phoning your BT
Having a remote access code prevents other people from accessing your answering machine functions without your permission.
Important
COK
COK
Press OK to confirm.
The display will ask you to Confirm code.
Press OK to confirm.
WARNING
You must change the Remote Access Code from the default setting of 0000 for your remote access to function.
To change your Remote
Access Code
If you enter your old code incorrectly the display will show Bad Code. Please check that you have not changed the code. Press the
Cbutton twice to exit and try again with the correct code.
If you have forgotten your remote access code you should call the Helpline on 0870 240 4682 and you will be advised on how to reset your telephone to its factory settings.
▲
▼
COK
▲
▼
COK
Use the UP or DOWN button to scroll to Base.
Press OK to confirm.
Use the UP or DOWN button to scroll to Base settings.
Press OK to confirm.
To switch on your answering machine from another external telephone
If you forget to switch your answering machine on you can do it from another
▲Use the UP or DOWN button to scroll
▼ to Answer.
C OK | Press OK to confirm. |
|
|
|
|
▲Use the UP or DOWN button to scroll
▼ to Remote acc.
telephone:
Dial your telephone number and let the phone ring. After approximately 10 rings your BT
COK
COK
Press OK to confirm.
Enter your old four digit code. (Factory setting is 0000)
Press OK to confirm.
Enter your new four digit code.
At this point press the # button.
You will hear, “Please enter your security code”. Enter your remote access code.
P | S | Wait for the confirmation tone then |
QR |
| |
7 |
| press 7. |
|
| |
Your answering machine will now be switched on.
30
