Note (cont)
If you have registered your handset to more than one base you can prioritise which base you want your handset to use. For instructions on base station priority, see page 21.
To register a handset to a base station (if you have changed the System Code from 0000)
At the base:–
At the base:–
S | Press and hold down the | SKIP button | |
| |||
kip |
|
|
|
until the PLAY button starts to flash.
Sk | Press and hold down the | SKIP button | |
| |||
ip |
|
|
|
until the PLAY button starts to flash.
On the handset:–
▲Use the UP button to scroll to Base.
Press OK to confirm.
COK
The display will show Register.
▲
▼
COK
COK
On the handset:–
Use the UP or DOWN button to scroll to Base.
Press OK to confirm.
The display will show Register.
Press OK to confirm.
Press OK to confirm.
COK
Use the UP or DOWN button to scroll
▲to Automatic.
▼Press OK to confirm.
COK
The display will show Searching for base.
After a few seconds the handset will be registered and display:
▲Use the UP or DOWN button to scroll
▼to Custom.
C OK | Press OK to confirm. |
▲Use the UP or DOWN button to scroll ▼ to the required base number.
C OK | Press OK to confirm. |
At this stage if you require you can edit the base name.
C OK | Press OK to confirm. |
Enter the System Code using the keypad.
Base 1
Handset 2
To check that the handset is registered press talk to hear a dial tone.
C OK | Press OK to confirm. |
The display will now flash Searching for base.
You will then see a list of the available handset numbers.
▲Use the UP or DOWN button to scroll
▼to the number you require.
C OK | Press OK to confirm. |
33
