Note
For the external line access code to be dialled for external calls only, it is important that all external numbers stored in your handset directory must contain more digits than the number of digits required to make an internal call to other extensions on your switchboard. This is most likely to occur when you have local external numbers stored in the handset directory without the area code. To overcome potential problems ensure that all numbers are stored complete with area code.
To activate and de-activate the external line access code
▲Press the UP or DOWN button to ▼ select Base.
C OK | Press OK. |
▲Press the UP or DOWN button to
▼select Base settings.
C OK | Press OK. |
▲Press the UP or DOWN button to
▼ select Phone Line.
COK
▲
▼
COK
Press OK.
Press the UP or DOWN button to select Prefix.
Press OK.
▲Press the UP or DOWN button to ▼ select Status.
C OK | Press OK. |
Press the to activate or
38