CY7C64215
DC Full-Speed USB Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V and 0°C < TA < 70°C, or 3.0V to 3.6V and 0°C < TA < 70°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and are for design guidance only.
Table 10. DC
Parameter | Description | Min | Typ | Max | Unit | Notes |
USB Interface |
|
|
|
|
| |
VDI | Differential Input Sensitivity | 0.2 | – | – | V | (D+) – |
VCM | Differential Input Common Mode Range | 0.8 | – | 2.5 | V |
|
VSE | Single Ended Receiver Threshold | 0.8 | – | 2.0 | V |
|
CIN | Transceiver Capacitance | – | – | 20 | pF |
|
IIO | – | 10 | μA | 0V < VIN < 3.3V. | ||
REXT | External USB Series Resistor | 23 | – | 25 | Ω | In series with each USB pin. |
VUOH | Static Output High, Driven | 2.8 | – | 3.6 | V | 15 kΩ ± 5% to Ground. Internal |
|
|
|
|
|
| enabled. |
VUOHI | Static Output High, Idle | 2.7 | – | 3.6 | V | 15 kΩ ± 5% to Ground. Internal |
|
|
|
|
|
| enabled. |
VUOL | Static Output Low | – | – | 0.3 | V | 15 kΩ ± 5% to Ground. Internal |
|
|
|
|
|
| enabled. |
ZO | USB Driver Output Impedance | 28 | – | 44 | Ω | Including REXT Resistor. |
VCRS | D+/D– Crossover Voltage | 1.3 | – | 2.0 | V |
|
DC Analog Output Buffer Specifications
The following tables list guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V and 0°C < TA < 70°C, or 3.0V to 3.6V and 0°C < TA < 70°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and are for design guidance only.
Table 11. 5V DC Analog Output Buffer Specifications
Parameter | Description | Min | Typ | Max | Unit | Notes |
VOSOB | Input Offset Voltage (Absolute Value) | – | 3 | 12 | mV |
|
TCVOSOB | Average Input Offset Voltage Drift | – | +6 | – | μV/°C |
|
VCMOB | 0.5 | – | Vdd - 1.0 | V |
| |
ROUTOB | Output Resistance | – | 0.6 | – | W |
|
| Power = Low |
| ||||
| Power = High | – | 0.6 | – | W |
|
VOHIGHOB | High Output Voltage Swing |
|
|
|
|
|
| (Load = 32 ohms to Vdd/2) | 0.5 x Vdd + 1.1 | – | – | V |
|
| Power = Low |
| ||||
| Power = High | 0.5 x Vdd + 1.1 | – | – | V |
|
VOLOWOB | Low Output Voltage Swing |
|
|
|
|
|
| (Load = 32 ohms to Vdd/2) |
|
|
|
|
|
| Power = Low | – | – | 0.5 x Vdd – 1.3 | V |
|
| Power = High | – | – | 0.5 x Vdd – 1.3 | V |
|
ISOB | Supply Current Including Bias Cell (No Load) | – | 1.1 | 5.1 | mA |
|
| Power = Low |
| ||||
| Power = High | – | 2.6 | 8.8 | mA |
|
PSRROB | Supply Voltage Rejection Ratio | 53 | 64 | – | dB | (0.5 x Vdd – 1.3) < |
|
|
|
|
|
| VOUT < (Vdd – 2.3). |
Document | Page 16 of 30 |
[+] Feedback
