ADVANCED ADJUSTMENTS & OPTIONAL SETTINGS PROGRAM MODE DEFAULT RANGE
LEVEL "2"
Press and hold both arrows until display reads "RECIPE CHANGES" "ENABLED - LOCKED".
1. | Perform Deep Clean? | - | - |
2. | Recipe Changes | Enabled | Enabled/Locked |
3. | Change Recipe Name |
|
|
4. | Add Recipe Name |
|
|
5. | Delete Recipe Name |
|
|
6. | Set Language | Eng | English/Spanish/French |
7. | Units | English | English/Metric |
8. | Base Temperature | Disabled | Enabled/ Disabled |
9. | Brew Lockout | Yes | YES/NO |
10. | Ready Degrees | 5°F below "SET" temp | |
11. | 1st Rinse Air On | OFF | |
12. | 2nd Rinse Air On | 60 | |
13. | 2nd Rinse Time | 2.0 | |
14. | Rinse Air Power | 7 | |
15. | Brew Count | Total (Non | |
16. | Brew Count | Total |
17.Enter Service #
18.Service Tools
19.Factory Defaults
RECIPE CHANGES
1. ENABLED LOCKED
Press to "ENABLE" adjustment, or to "LOCK". Press "SELECT" to advance to next screen.
By default "ENABLED" will be flashing to indicate that the brewing parameters may be accessed/changed. Selecting "LOCKED" will prevent changes to the brewing param- eters, but can still be accessed for viewing.
|
|
| Select "YES" to change/modify a recipe's name. Select "NO" | |
2. | ChangeRecipeName | |||
to advance to "ADD RECIPE NAME". | ||||
NO | YES | |||
|
| |||
|
|
|
|
A
B
HOUSE SPECIAL
CHANGE NEXT
DECAF _HOUSE SPECIAL
"CHANGE" will advance to next screen to modify the name that is displayed. "NEXT" advances to the next recipe name that has been programmed into memory. Default is "HOUSE SPECIAL" & "DECAF" only.
Use the UP/DOWN buttons to scroll through alpha/numeric
digit for that position. Use the button to move curser to the next digit to the right. Press the to move curser to the left. Once you are finished changing the name, scroll all the way to the right to advance to next screen.
|
|
| Allows you to add additional names to the default list. | |
3. | ADD RECIPE NAME? | |||
Select "YES" | ||||
NO | YES | |||
|
| |||
|
|
|
|
Page 13 | 42822.1 050412 |
|