Unknown State | ADTRAN Express XRT manual

Chapter 2. Installation

Three icons appear in the Tool Tray at different times representing three different states of the Express Configuration Wizard Tray Tool.

The icon illustrated in Figure 2-11 indicates the external analog modem is connected to the Express XRT and is enabled. Double clicking on this icon causes the Express Configuration Wizard Tray Tool to disable the external analog modem.

Figure 2-11

Express XRT Disabled, External Analog Modem Enabled

The icon illustrated in Figure 2-12 indicates the external analog modem is not connected and/or not enabled.

Double clicking on this icon enables the external modem when connected to an Express XRT.

Figure 2-12

Express XRT Enabled, External Analog Modem Disabled

The icon illustrated in Figure 2-13 indicates that the Express Con- figuration Wizard Tray Tool is in an unknown state. This icon may appear if the Express XRT is not connected to a COM port on the PC. Double clicking on this icon instructs the Express Config- uration Tray Tool to refresh the connection status.

Figure 2-13

Unknown State

61202.153L3-1

Express XRT User Guide

21

Image 35

ADTRAN manual Express XRT Disabled, External Analog Modem Enabled, Express XRT Enabled, External Analog Modem Disabled

Contents

User Guide Express XRT Trademarks Service Type Service Order Code Page Canadian Equipment Limitations Canadian Emissions RequirementsPage Page Page Nynex Telephone Company Contacts for Isdn ServicePage Table of Contents Installing an Analog Modem List of Figures List of Tables Figure B-1 Front Panel LEDs Getting Started Chapter OverviewExpress XRT Overview For a Macintosh Minimum RequirementsWhat You Provide For a PC What Adtran Provides Express XRT Contents Overview Verify Switch Settings Chapter InstallationInstalling the Adtran Express XRT Dip Switches on Rear Panel Connecting the Express XRT Standard Isdn Internet/Remote Access Application Express XRT Software InstallationGo to the Express XRT Software Installation section Select Adtran Express XRT from the Drivers list Microsoft Windows 95 and Windows NT Windows 95 Plug and Play Select Adtran Express XRT from the Drivers list Microsoft Windows 3.1 and Windows NT Installation OptionsGo to the section Using the Express Configuration Wizard on Get On With It Windows NT 3.51 INF File Installation Double-click the Express Configuration Installer icon Macintosh Installation Conference Calling Basic Telephone ServiceSupplementary Voice Services Call Waiting Automatic Redial Phone Number AllocationSingle Phone Number Operation For the Macintosh operating system Using the Express Configuration WizardFor Windows 95 and WIndows NT For WIndows 3.x and WIndows NT Express Configuration Automatic Guide option Installation Auto-Detect button Auto-Detect SPIDs/Switch Type Expert IsdnExpress Configuration Wizard Connection Tab This option only applies to North American switches Express Configuration Wizard Tray Tool Using the Express Configuration Wizard Help Preferences Tab Express Configuration Wizard Tray Tool Unknown State Express XRT Disabled, External Analog Modem EnabledExpress XRT Enabled, External Analog Modem Disabled Refresh Express Configuration Tray Tool MenuEnable/Disable Modem Properties Exit Installing Windows 95 Dial-Up Networking VT 100 Terminal Emulation VT 100 Configuration VT 100 Terminal Status Buffer VT 100 Terminal Configuration Menu VT 100 Terminal Status Buffer Menu External Analog Modem Application Installing an Analog Modem External Analog Modem Application Connecting an External Analog Modem Have Disk Installing a New External Analog ModemClick Connect External Modem Select Dont detect my modem I will select it from a list Required External Analog Modem Settings Configuring an External Analog Modem Controlling an External Analog Modem Express Configuration Wizard Modem Enable No Modem Attached Error Message Express Configuration Wizard Connecting an External Modem DEM Found Express Configuration Wizard Modem DisableTerminal Emulation Modem Enable HyperACCESS Enabling an External Analog Modem HyperACCESS Verifying External Modem Connection Internal Analog Modem Application Terminal Emulation Modem DisableHyperACCESS Disabling an External Analog Modem Internal Analog Modem Application Connecting an Internal Analog Modem Factory Default Configuration Chapter Application Configuration Factory Multilink PPP 128k Internet Profile ConfigurationsFactory PPP 64k Internet Factory Async Bonding 128k Remote Access Express Configuration WizardStarting the Express Configuration Wizard Software Factory V.120 64k Remote Access Creating a Custom Profile Internet and Remote Access Isdn Setup Tab Defining a User Program Button Protocol Tab Advanced Tab Message Waiting Indicator Inactivity TimerCalling Features Options Calling Features Tab Incoming Voice Call Options Flash/Hook DefaultEnable Call Rejection List Enable Anonymous Call Rejection BBS Applications Defining a Custom HyperACCESS Session Shiva Password Authentication Protocol Spap Application Configuration Chapter Upgrading Software Express Configuration Wizard Diagnostics Tab HyperACCESS Send Dialog Box Power/Line LED Flashes and B1 and B2 LEDs are Off Chapter TroubleshootingTroubleshooting Guidelines Power/Line LED is Off Power/Line LED, B1, and B2 LEDs Flash Green Auto-detect is only used in North America Dial-Up Connection ProblemsAuto-detect Switch/SPIDs Remains at Link Down Express XRT Not Detected Dial-Up Networking Difficulty External Analog Modem Not DetectedDifficulty with 230.4 kbps Operation AT Commands Appendix a AT Commands and S-Registers Reading an S-Register String Using an AT CommandUsing S-Registers Reading an S-Register Changing a String S-Register Dialing a Call using the AT Command ProcessorCommand Function Carrier Detect CD Control Line Options Clear-To-Send CTS Control Line Options AT Command Response Message Types S8 Call Rejection Register List ING PPP ModeS12 Escape Time S14 Misc Bits Async Bond DTE DTR DTE RTSDTE DSR DTE CD Bond Txdeq Switch TypeBond Txfa Bond Txadd LDN1 LOC S53 Call Type S54 Protocol S58 Call Screen INGSPID1 LOC SPID2 LOC Remote DTE ParityDTE Stop DTE Flow CR0 LOC S93 Call Type RoutingLocal Tones Country Appendix A. AT Commands and S-Registers Table B-A Appendix B LEDsLEDs Front Panel LEDs North America a ﬂashing light Appendix C Status Buffer Messages Accessinfodiscarded Bonding +/-XXX BadinfoelemBearcapnotavail Bearercapnotauth Channotimplemented BusyCallrejected Chandoesnotexist Destoutoforder Dest not Isdn ID = FacilitynotimplementFacilitynotsubscribed Facilityrejected LDN TOO Long InvalidelemcontentsInvalidmsgunspec Invalidnumberformat Nonexistentmsg NetworkcongestionNetworkoutoforder Nocircuitavailable Reqchannelnotavail ProtocolerrorPPP Compression UP PPP Link Loopback Temporaryfailure ServicenotavailTimerexpiry Source not Isdn Wrongmsgforstate V120 TimeoutWrongmessage Appendix D Loop Status Messages PPP Yyyy Rate adaption protocol V120 Appendix D. Loop Status Messages Pin Name Description Appendix E Connector PinoutsRS-232 Interface Table E-A Modem Interface Ring IndicatorData Terminal Ready = Input O = Output RJ-45 Isdn Line Interface Table E-CRJ-11 Pots Port Interface Table E-D Express XRT Ground Pinouts Figure E-3 Numerics Index INF Index Index Do not STAPLE. Registration form inside Express XRT Warranty Registration Card Post-Sales Support On-Line ServicesPre-Sales Inquiries and Application Support