Appendix C. Status Buffer Messages

AutoSwitch YYY

Switch type YYY detected during AutoSpid determination. (YYY can be DMS, NI-1, or AT&T)

Back to online

Express XRT went back on line.

Bad async BPS

The Bonding protocol determined that the selected asynchronous bit rate is not supported.

Bad AT numeric

User issued an AT command with an argument that was out of range.

Bad call type

Express XRT placed a call with an improper call type.

Bad DTE Baud

The DTE bit rate does not match a valid bit rate for the protocol selected.

BAD_INFO_ELEM

Call control error.

Bad phone number

Express XRT attempted to call an invalid phone number.

BEAR_CAP_NOT_AVAIL

The bearer channel requested is not available.

BEARER_CAP_NOT_AUTH

Bearer capability requested is not authorized.

Bearer Mode?

Incoming call is not of a type the Express XRT can accept.

Bearer Info Cap?

Incoming call information transfer capability is not known.

BONDING (+/-XXX)

The amount of bytes or corrected delay between the B2 and B1 Bearer channels (XXX can range from -8000 to +8128).

BPS mismatch

Bonding negotiation found a bit rate mismatch.

74

Express XRT User Guide

61202.153L3-1

Page 88
Image 88
ADTRAN Express XRT manual Badinfoelem, Bearcapnotavail, Bearercapnotauth, Bonding +/-XXX