ADTRAN Express XRT Changing a String S-Register, Dialing a Call using the AT Command Processor

Appendix A. AT Commands and S-Registers

Changing a String S-Register

Type ATSS followed by the number of the string S-register to be changed, an equal sign, the numeric string to be assigned to the register, then press Enter.

ATSS80=5551212

Dialing a Call using the AT Command Processor

To dial a call using the DTE terminal and AT commands, type ATD, ATDT, or ATDP and the telephone number on one line and press Enter.

ATD5551212

To end an active call with the AT command processor, press the break in key sequence +++ or the redefined key then type ATH and press Enter to hang up the line.

Command	Function
A	Answer. Places the Express XRT in answer mode.
AT!DATE	Current date in the format of DDMMYY.

AT!FLASHLOAD Initiate the flash software update. The terminal must be set for 57,600 bps, 8 data bits, no parity, and 1 stop bit.

AT!NAME1	Displays the Calling Party name from the last call on
	PORTS port 1.
AT!NAME2	Displays the Calling Party name from the last call on
	POTS port 2.
AT!NUMBER1	Displays the Calling Party number from the last call
	on POTS port 1.
AT!NUMBER2	Displays the Calling Party number from the last call
	on POTS port 2.
AT!S	Displays Status Buffer.
AT!S1	Displays Link Status
AT!TIME	Current time in the format of HHMMSS.
AT!V	Configuration Menu
AT!Z	Detect a modem connected to the Express XRT

DDial. Precedes the telephone access number [ATD5551212].

H Hang up. Disconnects the current call.

61202.153L3-1 Express XRT User Guide 59