ADTRAN Express XRT manual Using the Express Configuration Wizard, For Windows 95 and WIndows NT

Chapter 2. Installation

Using the Express Configuration Wizard

Use one of the following methods to start the Express Configura- tion program:

For Windows 95 and WIndows NT 4.0:

From the Start button, choose Programs, then ADTRAN, then Ex- press Configuration.

For WIndows 3.x and WIndows NT 3.51:

Open Program Manager. Double-click the Adtran icon and then the ISDN icon. Double-click Express Configuration.

For the Macintosh operating system:

1.Open the Adtran ISDN folder. Double-click the Express Con- figuration icon.

2.The program attempts to auto-detect an Express XRT on COM ports 1-4.

Press Configuration (for Windows 95 and Windows NT 4.0) only auto- detects COM ports 1 through 4. Express Configuration for the Macin- tosh auto-detects COM ports 1 through 12.

3.If auto-detection is successful, the screen shown in Figure 2-5 displays. Go to step 5.

4.If auto-detection is unsuccessful, the screen shown in Figure 2- 4 displays.

Figure 2-4

Unable to Auto-Detect

5.Select Cancel. The screen shown in Figure 2-5 on page 16 dis- plays.

61202.153L3-1 Express XRT User Guide 15