Chapter 2. Installation
14.In the Make a New Connection menu, enter the number to di- al.
15.Click NEXT.
16.Click Finish to complete the new connection setup.
17.To use this connection, select it from My Computer,
VT 100 TERMINAL EMULATION
The Express XRT can be configured using any communications package supporting VT 100 terminal emulation. To enter into the menus, type AT!V Enter. To go to a particular menu, press the hot key sequence for that menu. The main branches of the menu tree and their hot keys are as follows:
STATUS | (Ctrl + V) |
TEST | (Ctrl + T) |
CONFIG | (Ctrl + C) |
DIAL | (Ctrl + D) |
Ensure that the communications package is configured to pass these Control Sequences through to the Express XRT.
To exit the menus, press Ctrl + X. The Ctrl + X command also places the unit back
Some features in the Express XRT do not immediately take effect upon selection. This prevents unintentional reconfiguration of the Express XRT during an active call. Items such as Protocol and Call Type take effect only at the beginning of a new call.
VT 100 Configuration
1.After connecting a VT 100 terminal enter the command AT!V followed by Enter. The Configuration screen is the first screen displayed. An illustration of this screen is shown in Figure 2- 15 on page 25.
2.Enter the area code.
3.Enter ISDN phone number 1.
24 | Express XRT User Guide |
