Chapter 4. Application Configuration

Figure 4-1

ISDN Setup Tab

4.Enter the following information (under the ISDN Line Setup tab) as provided by your telephone company:

Switch Type

Area Code

ISDN Phone Number(s)

Service Profile Identification Number(s) (does not apply to units outside of North America)

If the unit is being configured in North American and service profile identifiers (SPIDs) and switch type are unknown, check the box labeled Auto-detect SPIDs/Switch and they are determined automatically once the OK button is selected.

5.After completing the parameters in the ISDN Line Setup win- dow, click on the Protocol tab (shown in on page 42).

61202.153L3-1

Express XRT User Guide

41

Page 55
Image 55
ADTRAN Express XRT manual Isdn Setup Tab