ADTRAN Express XRT manual Using the Express Configuration Wizard Help

Chapter 2. Installation

After installation is complete, the Express XRT resets the ISDN line for a clean start. Therefore, the PWR/LINE LED may not be on solid (indicating link up) for a few more seconds.

In the few cases where the procedure does not succeed, the non- standard SPIDs may be entered at Step 9 of the preceding proce- dure (Using the Express Configuration Wizard on page 15).

Using the Express Configuration Wizard Help

On-line help is available by clicking the Help button displayed in the Configuration screen. On-line help provides detailed infor- mation regarding such features as creating a custom profile, de- fining a user button, remote configuration, and testing.

Express Configuration Wizard Tray Tool

The Tray Tool is used for quick access to the Express Configura- tion Wizard and to enable or disable the external analog modem when used with an Express XRT.

The Express Configuration Wizard Tray Tool is provided only with the Windows 95 and Windows NT 4.0 versions of the Express Configura- tion Wizard.

To enable the Express Configuration Wizard Tray Tool, use the following procedure:

1.Run the Express Configuration Wizard. See the section Using the Express Configuration Wizard on page 15.

2.Close the Express Configuration Wizard.

3.Once the Express Configuration Wizard is closed, the Win- dows 95 or Windows NT 4.0 taskbar will have a new icon in the Tray Tool. Figure 2-9 on page 20 illustrates the new taskbar with the new icon in the Tray Tool.

61202.153L3-1 Express XRT User Guide 19