Bunn LCC-2 01180, 0230, 0330, 050.0, Programming The Dispenser, Lcd Display, Display Mode

PROGRAMMING THE DISPENSER

Open the dispenser door to access the digital programming module with LED display. Two basic modes are available to the operator: Display Mode and Program Mode.

To enter the Display Mode, Set the RUN/NIGHT/PROGRAM Switch to the RUN position.

To enter the Program Mode, Set the RUN/NIGHT/PROGRAM Switch to the PROGRAM position.

Display Mode: Used to view the current set-up values. Use the MENU switch to scroll to the next display.

NOTE: The display blanks out after two minutes of inactivity. Press any button to activate the display.

LCD DISPLAY

180

MENU (-) (+)

01180

MENU (-) (+)

0230

MENU (-) (+)

0330

MENU (-) (+)

0 4	0.0
MENU (-)	(+)

050.0

DISPLAY MODE	DESCRIPTION
Home View	Alternates between Tank Temperature
	and Cabinet Temperature.

Tank Temperature Displays Target Tank Temperature (F°)

Regular Dispense Ratio Displays Left Dispense Ratio (XXX:1)

Decaf Dispense Ratio Displays Right Dispense Ratio (XXX:1)

Cup Dispense Volume	Displays Cup Dispense Volume (XX.X
	Oz.). Set to 0.0 for “Push and Hold”
	Dispensing.

Carafe Dispense Volume	Displays Carafe Dispense Volume
	(XX.X Oz.)

MENU (-) (+)

12 39288 072707