Bunn LCC-2 P230, P3, PROGRAMMING THE DISPENSER Cont, Program Mode, Lcd Display, Description

PROGRAMMING THE DISPENSER (Cont.)

Program Mode: Used to change or enter new set-up values.

To enter the Program Mode, Set the RUN/NIGHT/PROGRAM Switch to the PROGRAM position, the unit will display “__PPP” to indicate it is in the Program Mode. Use the MENU switch to scroll to the next display. Use the Increase (+) and Decrease (-) switch to adjust the values.

LCD DISPLAY

P 1180

MENU (-) (+)

P230

MENU (-) (+)

P3 3 0

MENU (-) (+)

P40. 0

MENU (-) (+)

P50. 0

MENU (-) (+)

P60. 0

PROGRAM MODE	DESCRIPTION
Tank Temperature	Default = 180°F (82°C)
	Range = 120° - 200°F (49 - 93°C)
	Ready Temp = Tank Temp minus 10°F
	(~5.5°C)
Left (Regular) Dispense Ratio	Set Regular Coffee Mix Ratio
	Default = 30:1
	Range = 25 Max / 100 Min
Right (Decaf) Dispense Ratio	Set Decaf Coffee Mix Ratio
	Default = 30:1
	Range = 25 Max / 100 Min
Cup Dispense Volume	Set Cup Dispense Volume
	Default = 0.0, Push & Hold
	Range = 0.0 / 16.0 Oz.
	(0.0 / 0.5 L)
Carafe Dispense Volume	Set Carafe Dispense Volume
	Default = 0.0, Disabled
	Range = 0.0 / 64.0 Oz.
	(0.0 /2.0 L)
Left (Regular) Dispense Total	Reset Total to Zero (00.0 Gal)
	(0.00 Liters)

MENU (-) (+)

14 39288 072707