Bushnell 4070 Scan slides and negatives

You can scan multiple pictures at the same time from the scanner glass.

Note The Preview setting for the Scan Picture button ( ) must be set to off to

scan multiple pictures with one scan. Normally the Preview setting is set

to off already. To change the Preview setting for the Scan Picture button

(), see Change settings

1 Place the original pictures in each corner of the scanner glass with at least

1/4 inch (6.35 mm) space between the pictures.

Tip After scanning the pictures, you can rotate the scanned pictures in the

HP Image Zone software.

2 Close the scanner lid.

3Click the Scan Picture button ( ) on the front of the scanner.

4 Follow the on-screen instructions.

Each scanned picture appears in the HP Image Zone software as a

separate picture.

Scan slides and negatives

●To scan a transparency that was used for an overhead projector, place the

transparency on the scanner glass, place a white sheet of paper on top of

the transparency, and then scan as usual.

●When scanning a 35 mm slide or negative, the scanner software

automatically enlarges the image to approximately 4 x 6 inches (10 x 15

cm). If you want the final image to be larger or smaller, use the Resize tool

in the scanner software to set the scaling to final size you want; the scanner

will scan the item at the proper resolution and enlargement for the size you

choose.

●To scan 35 mm slides or negatives by using the TMA, press the Scan

Slides or Negatives button ( ) on the front of the scanner.

The transparency materials adapter (TMA) enables you to scan up to four slides

(two in each side of the slide holder) at one time.

How to use the scanner

User's Manual 7