Displaying Switch Module Port Status
•Carrier Losses - the number of packet transmissions that detected a loss of carrier (usually a transceiver problem).
•Total Collisions - number of collision during packet transmissions.
•Excess Collisions - number of packet transmissions that were aborted due to 16 collisions (usually a transceiver problem).
•RX FCS/Align Errs - number of times a received packet was discarded due to a bad checksum or Frame Alignment error.
•Internal RX Errs - number of times an inbound packet was dropped due to an internal error. (Whenever a packet is dropped due to TX_Q Overflows, Internal RX Errs may also be incremented.)
•Internal TX Errs - number of times a packet transmission was aborted due to an internal error.
NOTE |
All of the counter values are reset to zeros if the ATX is rebooted or if the module housing that port is stopped and restarted.
FE Switch Module User Guide | Page |
