Manuals / Cabletron Systems / Computer Equipment / Network Card

Cabletron Systems 9A128-01 manual Clearing All Permanent, Static, or Dynamic Entries

Models: 9A128-01

1 85

Download 85 pages 60.82 Kb

Page 80

Image 80

Bridging

2.In the Filter Address ﬁeld, type in the address (Hex format) for which you desire bridging. Be sure to add “-” as a separator between each byte in the address.

3.In the Receive Port ﬁeld, type in the port at which the address must be detected for bridging to take place. If you enter a value of 0 in this ﬁeld, the Receive Port is considered promiscuous (i.e., any port), and will be designated by an * in the Address Entry panel.

4.Click on OK.

5.Specify the Port Filtering action on the address entry as described in the previous section.

To delete an address:

1.Click to highlight the address entry in the Address Entry panel that you wish to delete from the ﬁltering database.

2.Click on Delete.

Clearing All Permanent, Static, or Dynamic Entries

To erase all Permanent, Static, or Dynamic entries from the Filtering Database,

click on the associated button in the upper portion of the window.

Filtering Database

5-27

Image 80

Cabletron Systems 9A128-01 manual Clearing All Permanent, Static, or Dynamic Entries

Contents

Cabletron Systems Virus Disclaimer Page Restricted Rights Notice Page Contents Index Chapter Fddi ManagementChapter Bridging Using This Guide Introduction Related Reading Software Conventions Common Window FieldsDevice Name IP Address Using Buttons Using On-line HelpGetting Help Location Getting Help from the Cabletron Systems Global Call Center FTP Firmware Versions Supported 9A128-01 Module View Viewing Module Information Front Panel Information Boot Prom Connection StatusUpTime Port Status Date Menu StructureTime A128-01 Module View Menu Structure Device Menu Port Status Menu Fddi Menu Utilities MenuHelp Menu Board Menus Port Status Displays Port Menus Selecting a Port Status View Bridge Port Status Displays Bridge Port State Bridge MappingBridge Port Status Color Codes Fddi Port Status Displays Connection State LER Estimate Chassis Manager Window Fddi Port Status Color Codes Module Type Viewing Hardware TypesDevice Type Viewing I/F Summary Information Module Type Window Index DescriptionSta Interface Performance Statistics/Bar Graphs Raw Counts Load Rate Interface Statistics Window Error AddressUnicast Non-Unicast Using the Find Source Address Feature Packets Received Received onlyTransmit Queue Size Transmit only Packets Transmitted Transmit only Setting the Device Date and Time Managing the Hub Enabling and Disabling Ports Bridge Ports Module Ports Accessing the ATM Connections Window ATM Conﬁguration ATM Conﬁguration Connection Data Settings VPI Conﬁguring Connections Adding a New Connection Deleting a Connection ATM Conﬁguration Conﬁguring Connections Fddi Management Conﬁguration Fddi Management MAC State Neg. Negotiated SMT VersionReq. Requested Target Token Rotation Time Concentrator M Ports Concentrator Non-M PortsNumber of MACs MAC Path Connection Policy 15 32,768 a permanently set value for this bit Number of Nodes Address ModeStation List Stations Panel Node ClassTopology Upstream Neighbor Performance Frame Errors Transmit FramesReceive Frames Lost Frames Fddi Management Performance Bridging Bridge Status Window Bridging Up Time Bridge State on InterfaceInterface Type Bridge Address Conﬁguring Duplex Modes Enabling and Disabling Bridging Bridge Statistics Performance Graphs Forwarded Green Total Errors Red Filtered MagentaXmitted Blue Conﬁguring the Bridge Performance Graphs Errors ForwardedFiltered Xmitted Forwarded from Interface Statistics WindowForwarded to Description Using Source Addressing Setting the Ageing Time Port Source Addresses Window Bridge Spanning Tree Conﬁguring the Bridge Spanning Tree Window Bridge Priority Root Bridge Root CostRoot Port Protocol Forwarding Delay Hello TimeMax Age Hold Time Changing Bridge Spanning Tree Parameters Changing Hello Time Changing Bridge PriorityChanging the Spanning Tree Algorithm Protocol Type Changing Port Priority Changing Forwarding Delay TimeChanging Max Age Time Filtering Database Changing Path Cost Bridging Bridging List NumberCapacity Ageing Time Port Filtering Conﬁguring the Filtering DatabaseReceive Port Altering the Ageing Time Changing the Type of EntryChanging the Receive Port Changing the Port Filtering Action Clearing All Permanent, Static, or Dynamic Entries Bridging Filtering Database Index Index-2 Index-3 Index Index-4