Cabletron Systems HSIM-W87 manual Enter imux 1 -eg

Sample IMUX Configuration

2.After all the desired channels have been added to the group (four were put in the group in this example), the group must be enabled:

Enter: imux 1 -eg 1

The screen shows the response to the imux command to enable group 1 in Figure 4-4.

->imux 1

#

#WAN Inverse Multiplexer 1 Status: Disabled

#		Inverse		WAN	Available	Xmit Byte		Inverse
# Multiplexer			Group	Physical	BW	Count	Multiplexer		Channel
#	ID	Admin	Status	Number	(bits/sec)	(bytes)	ID	IfIndex	Status
#	-------------------------------------------------------------------------------------------------------------
#	1	Disabled		21	1536000	0	1	28	INACTIVE
#	1	Disabled		22	1536000	0	2	29	INACTIVE
#	1	Disabled		23	1536000	0	3	30	INACTIVE
#	1	Disabled		24	1536000	0	4	31	INACTIVE
#
#

#Number of WAN Inverse Multiplexer Groups currently programmed : 1

#Number of WAN Inverse Multiplexer Channels currently programmed : 4

->imux 1 -eg 1

# Inverse Multiplexer group 1 enabled.

imuxsetup2

Figure 4-4 Enabling the IMUX Group

3.The next step is to enable the imux application for imux 1: Enter: imux 1 -ea

The screen in Figure 4-5displays the response to the command.

HSIM-W87 User’s Guide 4-15