Cadillac 2010 Infotainment System 6-53

Black plate (53,1)
Cadillac SRX Owner Manual- 2010
Infotainment System 6-53
4. Start the Pairing process on the
cell phone that will be paired to
the vehicle. Reference the cell
phone manufacturers user guide
for information on this process.
Locate the device named
“General Motors”in the list on
the cell phone and follow the
instructions on the cell phone to
enter the four‐digit PIN number
that was provided in Step 3.
5. The system prompts for a name
for the phone. This name will be
used to indicate which phone is
connected. The system confirms
the name.
6. The system responds with
“<Phone name> has been
successfully paired”after the
pairing process is complete.
7. Repeat Steps 1 through 7 for
additional phones to be paired.
Listing All Paired and Connected
Phones
1. Press b/g. The system
responds with a tone. After the
tone say “Hands Free”. The
system responds “Ready”
followed by a tone.
2. Say “Bluetooth”. The system
responds “Bluetooth ready”
followed by a tone.
3. Say “List”. The system lists all
the paired Bluetooth devices.
The system will respond “is
connected”if a phone is
connected to the vehicle.
Deleting a Paired Phone
1. Press b/g. The system
responds with a tone. After the
tone say “Hands Free”. The
system responds “Ready”
followed by a tone.
2. Say “Bluetooth”. The system
responds “Bluetooth ready”
followed by a tone.
3. Say “Delete”. The system asks
which phone to delete followed
by a tone.
4. Say the name of the phone to be
deleted. If the phone name is
unknown, use the “List”
command for a list of all paired
phones. The system responds
“Would you like to delete <phone
name>? Yesor No”followed by
a tone.
5. Say “Yes”todelete the phone.
The system responds “OK,
deleting <phone name>”.