Cadillac 2010 owner manual Receiving a Call, Three‐Way Calling, Using the Re‐dial Command

Infotainment System 6-59

Using the Re‐dial Command

1.Press b / g. The system responds with a tone. After the tone say “Hands Free”. The system responds with “Ready” followed by a tone.

2.After the tone, say “Re‐dial”. The system responds “Re‐dial using <phone name>” and dials the last number called from the connected Bluetooth phone.

Once connected, the person called will be heard through the audio speakers.

Receiving a Call

When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle.

.Press b g to answer the call.

Call Waiting

Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier.

.Press b g to answer an incoming call when another call is active. The original call is placed on hold.

.Press b g again to return to the original call.

.To ignore the incoming call, no action is required.

.Press c / $ to disconnect the current call and switch to the call on hold.

Three‐Way Calling

Three‐Way Calling must be supported on the Bluetooth phone and enabled by the wireless service carrier.

1.While on a call press b g. The system responds with “Ready” followed by a tone.

2.Say “Three‐way call”. The system responds with

“Three‐way call, please say dial or call”.

3.Use the dial or call command to dial the number of the third party to be called.

4.Once the call is connected, press b g to link all the callers together.

Ending a Call

.Press c / $ to ignore a call.

Press c / $ to end a call.