Black plate (38,1)
Cadillac SRX Owner Manual- 2010

8-38 Driving and Operating

If the vehicle has the StabiliTrak
®
system and begins to limit wheel
spin while using cruise control, the
cruise control automatically
disengages. See StabiliTrak
®
System
on page 835
or Traction
Control System (TCS)
on
page 834
. When road conditions
allow the cruise control to be safely
used, you can apply the cruise
control again.
Cruise Control
The cruise control buttons are
located on the left side of the
steering wheel.
T(On/Off): Press to turn the
system on and off.
+ RES (Resume/Accelerate):
Press briefly to make the vehicle
resume to a previously set speed or
press and hold to accelerate.
SET (Set/Coast): Press to set the
speed and activate cruise control or
make the vehicle decelerate.
[(Cancel): Press to disengage
cruise control without erasing the
set speed from memory.
Setting Cruise Control
If the cruise button is on when not in
use, it could get bumped and go into
cruise when not desired. Keep the
cruise control switch off when cruise
is not being used.
The cruise control light on the
instrument panel cluster comes on
after the cruise control has been set
to the desired speed.
1. Press T.
2. Get up to the desired speed.
3. Press and release the SET
button located on the steering
wheel.
4. Take your foot off the
accelerator.
Resuming a Set Speed
If the cruise control is set at a
desired speed and then the brakes
are applied, the cruise control is
disengaged without erasing the set
speed from memory.
Once the vehicle speed reaches
about 40 km/h (25 mph)or more,
press the +RES button on the
steering wheel. The vehicle returns
to the previous set speed and stays
there.