Handling sheets for paper feed slots
Selecting the Paper T ype (Sheet)
When changing the type of paper after the paper has been advanced, specify the type of paper as follows.
Note
•After you press the Feeder Selection button to illuminate the Cut Sheet lamp , press the Load/Eject
button to display a screen for selection of the paper type.
Press ▲or ▼to select the type of paper , and then press the OK button to display a screen for selection
of the paper size. ( → P .163)
•If you have sent the print job from a computer beforehand, the screen for paper type and size selection
is not displayed. Printing will start after the paper is advanced.
1. Press the Menu button to display MAIN MENU .
2. Press ▲or ▼to select Media Menu , and then press the ►button.
3. Press ▲or ▼to select Manual PaperT ype , and then press the ►button.
4. Press ▲or ▼to select the type of paper loaded in the printer , and then press the OK button.
Note
•Select POP Board when loading heavyweight paper .
•For details on paper types, see the Paper Reference Guide . ( → P .108) Plain Paper is selected by
factory default.
•Be sure to select the correct paper type. If this setting does not match the loaded paper , it may
cause feed errors and af fect the printing quality .
5. Press the Online button to bring the printer online.
162 Handling Paper