Messages regarding paper
Borderless printng not possible.Check roll width and spacers.
Cause Corrective Action
Insert the paper and Spacer for Borderless Printing
rmly all the way into the printer .
When using A1 or A2 rolls, attach the Spacer for
Borderless Printing before loading the roll.
( → P .144)
The paper is loaded askew .
When using sizes other than A1 or A2, remove the
Spacer for Borderless Printing before loading the roll.
( → P .144)
The paper loaded is not compatible with borderless
printing.
Load paper compatible with borderless printing and
try printing again. Paper you can use for borderless
printing is restricted to particular types of paper and
rolls of particular widths. For information on types of
paper compatible with borderless printing, refer to the
Paper Reference Guide . ( → P .108)
Because paper expands or contracts depending on
the environment of use, it may become narrower or
wider than the supported width for borderless printing.
Use each type of paper only where the recommended
environmental conditions are met. For details on
environmental conditions for various paper , see the
Paper Reference Guide . ( → P .108)
Check supported paper .
Cause Corrective Action
Follow these steps to change the settings of the print
job to enable borderless printing.
1. Hold down the Stop button for a second or more
to cancel printing.
2. Make sure the correct printer driver for the printer
is selected and try printing again.
For information on types of paper compatible with
borderless printing, refer to the Paper Reference
Guide . ( → P .108)
The print job received species a type or width of
paper that is not compatible with borderless printing.
If you press the Online button and continue printing,
the document will be printed with a border .
696 Error Message