Other Messages

Other Messages

GARO Wxxxx (x represents a number)

Cause Corrective Action
T ry printing again, using the correct printer driver .There is a problem with the print job.
It is also possible to continue printing in this state.
However , you may not be able to obtain the desired
printing results.

T op cover is open.

Cause Corrective Action
Open the T op Cover fully , remove any foreign objects,
and close the T op Cover again.
The printer has detected that the T op Cover is open.
If the error occurs again, turn of f the printer and wait
a while before restoring power .

ERROR Exxx-xxxx (x represents a letter or number)

In the following situations, turn of f the printer and wait at least three seconds before restoring power .
If the message is still displayed, write down the error code and message, turn of f the printer , and contact your
Canon dealer for assistance.
•“ERROR” is displayed, followed by the error code and Call for service.

Unknown le.

Cause Corrective Action
Invalid data format. Check the print job and resend it.

Prepare for parts replacement.

Cause Corrective Action
It is almost time to replace consumables for which
service is required.
If Parts replacement time has passed. is displayed,
you can continue to use the printer for some time.
Contact your Canon dealer for assistance.

Parts replacement time has passed.

Cause Corrective Action
It is past the recommended time to replace
consumables for which service is required.
Contact your Canon dealer for assistance.
Error Message 709