Handling sheets for paper feed slots
Selecting the Paper Size (Sheet)
T o change the paper size after paper has been advanced, select the paper size as follows.
Note
•After you press the Feeder Selection button to illuminate the Cut Sheet lamp , press the Load/Eject
button to display a screen for selection of the paper type automatically .
Press ▲or ▼to select the type of paper , and then press the OK button to display a screen for selection
of the paper size. Press ▲or ▼to select the paper size, and then press the OK button. The printer
is now ready to advance the paper .
•If you have sent the print job from a computer beforehand, the screen for paper type and size selection
is not displayed. Printing will start after the paper is advanced.
1. Press the Menu button to display MAIN MENU .
2. Press ▲or ▼to select Media Menu , and then press the ►button.
3. Press ▲or ▼to select Manual PaperSize , and then press the ►button.
4. Press ▲or ▼to select the size of paper loaded in the printer , and then press the OK button.
Note
•For details on paper sizes, see “Paper Sizes”. (→P .1 13)
5. Press the Online button to bring the printer online.
Handling Paper 163