Borderless Printing
Borderless Printing by Resizing Originals to Fit the Roll
W idth (W indows)
This topic describes how to enlarge originals before borderless printing to match the roll width, based on the
following example.
If you use n A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the Roll
Holder . ( → P .144)
If you do not attach the Spacer for Borderless Printing , the Platen may be soiled from borderless printing.
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 1 1.7 in)
Paper: Roll
Paper type: Heavyweight Coated Paper
Roll paper width: 10 inches (254.0 mm)
1. In the application, create an original that takes up the entire space of the paper size.
Note
If you can specify the margin, as in Microsoft W ord, set the margin at 0 mm. For instructions on
specifying the margin, refer to the software documentation.
2. Choose Print in the application menu.
3. Select the printer in the dialog box, and then display the printer driver dialog box. ( P .473)
4. Make sure the Main sheet is displayed.
5. In the AMedia T ype list, select the type of paper that is loaded. In this case, click Heavyweight
Coated Paper .
6. Select the print target in the EPrint T arget list.
312 Enhanced Printing Options