Network Setting
Conguring the IP Address Using the Printer ControlPanel
This topic describes how to congure the printer ’ s IP address on the Control Panel .
1. Press the Menu button to display MAIN MENU .
2. Press ▲or ▼to select Interface Setup , and then press the ►button.
3. Press ▲or ▼to select TCP/IP , and then press the ►button.
4. Press ▲or ▼to select IP Setting , and then press the ►button.
5. Press ▲or ▼to select IP Address , and then press the ►button.
6. After pressing ◄or ►to select the input eld, press the OK button to enable numerical input.
7. Press ▲or ▼to select the number , and then press the OK button.
Note
•Pressing the ▲button increases the number by 1. The maximum value is “255,” after which “0” is
displayed.
•Pressing the ▼button decreases the number by 1. The minimum value is “0,” after which “255” is
displayed.
•Hold down ▲or ▼to increase or decrease the value continuously .
8. Repeat steps 3-4 to enter the IP address assigned to the printer .
9. Press the Online button to bring the printer online.
If any of the settings are changed, a message for conrmation is displayed. In this case, press
the OK button.
Note
•If an error message is displayed, check the settings and correct any invalid values.
•T o cancel the setup process, hold down the Stop button for a second or more.
Important
•Be sure to complete step 6. This will activate the values you have entered.
•Y ou can also specify the subnet mask and default gateway on the Control Panel .
Network Setting 551