Cannot print over a network
Conguring the Communication Mode Manually
This topic gives instructions for conguring the communication mode manually .
1. Press the Menu button to display MAIN MENU .
2. Press ▲or ▼to select Interface Setup , and then press ►.
3. Press ▲or ▼to select Ethernet Driver , and then press ►.
4. Press ▲or ▼to select Auto Detect , and then press ►.
5. Press ▲or ▼to select Off , and then press OK .
Return to the Ethernet Driver menu.
6. Press ▲or ▼to select Comm.Mode , and then press ►.
7. Press ▲or ▼to select the communication mode, and then press the OK button.
Return to the Ethernet Driver menu.
8. Press ▲or ▼to select Ethernet T ype , and then press ►.
9. Press ▲or ▼to select the Ethernet type, and then press OK .
Return to the Ethernet Driver menu.
10. Press ▲or ▼to select Spanning T ree , and then press ►.
1 1. Press ▲or ▼to enable or disable spanning tree support, and then press OK .
Return to the Ethernet Driver menu.
12. Press the Online button.
After the conrmation message is displayed, press OK .
The printer will now restart.
658 T roubleshooting