Canon 1016B002 Basic Printing W orkow

Printing procedure

Basic Printing W orkow

These are the basic steps for loading and printing on rolls.

Follow the steps below to switch to a new roll or a roll of a dif ferent type or width before printing.

Note

•If a sheet is loaded in the T op Paper Feed Slot , remove it before this procedure. ( → P .146)

•Before printing banners or other long documents, spread a clean cloth or paper on the oor or use the

Output Stacker to prevent the printed surface from becoming dirty from the oor after printing.

•If you will wait for the ink to dry after printing and simply eject the document, you can deactivate

automatic cutting and print a cut line instead. ( → P .129)

1. T urn the printer on. (→P .19)

2. Select roll paper as the paper source. (→P .1 15)

80 Basic Printing W orkow