Color adjustment
Printing in Colors Matching the Measured Ambient Light
Measure the light level in the viewing environment and enter the results in the printer driver before printing.
Important
This function requires the Eye-One spectrophotometer . The Light Source Measure T ool must also
be installed.
Y ou can install the Light Source Measure T ool from the User Software CD-ROM .
For a list of supported Eye-One devices, refer to the manual provided with the Light Source Measure
T ool .
1. Using the Eye-One spectrophotometer and the Light Source Measure T ool , determine the
Lighting Source T ype and Color T emperature in the viewing environment.
Note
For detailed instructions on Eye-One and the Light Source Measure T ool , refer to the provided
instructions.
2. Choose Print in the application menu.
3. Select the printer in the dialog box, and then display the printer driver dialog box. ( P .473)
4. Make sure the Main sheet is displayed.
5. In the AMedia T ype list, select the type of paper that is loaded (for example, Glossy Photo
Paper).
Important
Ambient Light Matching Mode (Kyuanos) may not be available, depending on the type of paper
used. For details, see “T ypes of Paper”. (→P .108)
608 Maintenance