Maintenance Cartridge
12. Holding the handles on both sides of the new Maintenance Cartridge (a), insert it completely ,
keeping it level.
13. Hold the Ejection Guide on both sides by the near end. Aligning the Ejection Guide with the
guides (a), insert it into the printer until it locks in place.
14. Press the OK button.
The printer returns to the mode before replacement of the Maintenance Cartridge . If a message
is displayed advising you to replace the Maintenance Cartridge , printing is not possible. Make
sure that the Maintenance Cartridge is installed correctly .
If a print job was in progress when the Maintenance Cartridge was replaced, printing is resumed.
Important
•Do not remove the Maintenance Cartridge during about the rst ve seconds after the printer goes
back online. This may damage the Maintenance Cartridge .
•If you replace the Maintenance Cartridge when the printer is of f, do not remove the Maintenance
Cartridge during about the rst ve seconds after you turn the printer on again after replacement.
This may damage the Maintenance Cartridge .
636 Maintenance