Control Panel
Specifying numerical values
Follow the steps below to enter numbers for items such as network settings.
1. Press or to select Interface Setup , and then press the button.
2. Press or to select TCP/IP , and then press the button.
3. Press or to select IP Setting , and then press the button.
4. Press or to select IP Address , and then press the button.
5. Press or to move the cursor (_) to each eld for entering numbers.
6. Press or to select the number , and then press the OK button.
Note
Hold down or to increase or decrease the value continuously .
Make sure the IP address you enter for the printer is not the same as any computer IP address
in your network.
7. Repeat steps 2 and 3 to continue entering numbers.
8. Press the Online button to bring the printer online.
Note
If a conrmation message is displayed regarding the setting you entered, press the OK button. The
setting is applied, and the printer goes online.
Printer Parts 33