Canon 1 1. 2. , 3.

1. Set the camcorder to a recording program.

2. Activate the DV CONTROL function.

For details, refer to the camcorder instruction manual.

3. Connect the camcorder to the computer using the IEEE1394 (DV)

cable.

•You do not need to turn off the computer.

•Do not deactivate the DV CONTROL function while the camcorder is connected to the

computer.

•Refer to the computer manual for the location of the computer’s IEEE1394 (DV) port.

•Refer to the camcorder instruction manual for connecting instructions.

•When the camcorder is correctly connected to the computer, a camcorder icon

appears under [My Computer].

IEEE1394 Port

on the Computer

DV Terminal

on the Camcorder

IEEE1394 (DV) Cable

Camcorder End Computer End

4-pin:

6-pin:

Contents

Main Read Carefully Before Using CANON SOFTWARE LICENCE AGREEMENT Page Read Carefully Before Using Contents Read This First Disclaimer Trademark Acknowledgements Canon camcorder compatible with DV-PC Recorder Required Accessories System Requirements Page Page Connecting the Camcorder to the Computer 1. 2. 3. Starting DV-PC Recorder 1. 2. Main Panel System Menu Camcorder Screen Display Page Setting Video Folder, File Name and Recording Mode [General] Tab Setting Video Folder, File Name and Recording Mode [Record] Tab Page 3. Recording on the Hard Disk 1. The recording panel appears. 2. Press the start/stop button on the camcorder. When operating DV-PC Recorder: Click . Page Recording on the Hard Disk Recording Panel Recording on the Hard Disk Frame Dropping Recording History Reviewing the Recorded Picture You can review the recorded picture by playing back the file. 1. The playback panel appears. 2. Click the thumbnail of the file you wish to play back. 3. Time Slider Reviewing the Recorded Picture Page Troubleshooting