Handling rolls

Specifying the Cutting Method for Rolls
How a roll is cut after ejection varies depending on the printer settings.
Cutting Method Menu Settings Driver Setting
Automatic Rolls are automatically cut by the Cutter
Unit .
Automatic Y es
Eject
(→P .131)
Choose this setting if you prefer not to
have documents dropped immediately after
printing, as when waiting for ink to dry .
T o cut the roll paper using the Cutter Unit
, hold down the Stop/Eject button for a
second or more.
Eject Y es
Manual
(→P .132)
Choose this setting when using paper or
media that cannot be cut using the Cutter
Unit .
Cut each page from the roll using scissors.
For continuous printing (if you will cut each
page later), in Auto Cut , select Y es , or
select Print Cut Guideline .
( → P .447)
Cutting
Mode
Manual No Y es
Print Cut
Guideline
Paper
Cutting
(→P .133)
Choose this option if you want to cut pages
by pressing Cutter Unit buttons for manual
cutting after printing when the printer driver
is congured to Auto Cut >No or Print Cut
Guideline .
Otherwise choose this option if you want to
cut the roll edge after loading a roll.
Paper Cut Y es
Auto
Cut
No Print Cut
Guideline
Note
•Automatic and Eject are valid only when you have specied Auto Cut >Y es in the printer driver .
•With Eject, printing does not resume after a series of jobs have been printed continuously until the
roll is cut.
Cut roll paper manually in the following cases:
130 Handling Paper