Printer Specications
Printer Specications

Specications

Important
•This information is subject to change as the printer is updated.
•The following values may vary depending on the operating environment.

Printer

Power supply 100-120 V AC (50/60 Hz), 220-240 V AC (50/60 Hz)
In operation 100 W max.
Sleep mode 100-120 V : 5 W max.
(8 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
220-240 V : 6 W max.
(9 W max. when an IEEE 1394 (FireWire) expansion board is
installed.)
Power consumption
Of f 1 W max. (*1)
Operating noise Approx. 51 dB (A) max.
T emperature 15-30°C (59-86°F)Operating
environment
Humidity 10-80%, non-condensing
Dimensions (W × D × H) 999×810×344 mm (39.3×31.9×13.5 in)
W eight
(not including the Printhead and Ink T ank )
49 kg (108.0 lb)
Space required for installation (*2) 1,299×1,910×644 mm (51.1×75.2×25.4 in)
Applicable standards International Energy Star Program, Law on Promoting Green
Purchasing, GPN, RoHS, The Eco Declaration, WEEE, U.S.
presidential directives
*1: The printer uses a trace amount of power even when turned of f. T o stop all power consumption,
turn of f the printer and unplug the power cord.
*2: Normally , you will need to ensure an unobstructed space of 800 mm (31.5 in) in front of the printer , 300
mm (1 1.8 in) behind, 150 mm (5.9 in) on both sides, and 300 mm (1 1.8 in) above the printer . Only
when printing from the Front Paper Feed Slot , leave 800 mm (31.5 in) of unobstructed space in front
of the printer and 400 mm (15.7 in) behind it.
72 Printer Parts