Printheads
Replacing the Printhead
Follow the steps below to replace the Printhead . Failure to follow this procedure may cause ink leak from
the Printhead , which may cause stains.
Note
•Prepare a new Ink T ank when ink levels are low .
•Y our hands may become dirty during Printhead replacement. Use the gloves provided with the new
Printhead for replacement.
•Choose On in Auto Print to have the printer automatically adjust the Printhead alignment after
replacement of the Printhead . ( → P .47)
1. If the roll is not ejected because of the cutting method selected, cut it manually and remove it.
( → P .447)
2. Clean inside the T op Cover . ( → P .670)
3. Press the Menu button to display MAIN MENU .
4. Press ◄or ►to select Maintenance , and then press ▼.
MAIN MENUMaintenance ↓
5. Press ◄or ►to select Replace P .head , and then press ▼.
Maintenance
Replace P .head ↓
6. Press ◄or ►to select Printhead , and then press ▼.
Select Left Printhead to replace the left Printhead or select Right Printhead to replace the
right Printhead .
Replace P .headLeft Printhead ↓
654 Maintenance