Handling sheets for paper feed slots
Removing Heavyweight Paper from the Front Paper FeedSlot
If you are printing heavyweight paper from the Front Paper Feed Slot , the printer will stop advancing the paper while
the trailing edge is still in the rollers to prevent the sheet from dropping. In this case, remove the paper as follows.
1. Press the ▲button.
Note
•If you load paper from the Front Paper Feed Slot but press the ▲button without printing, the printer
will eject the paper and stop advancing it momentarily while the trailing edge is still in the rollers to
prevent the sheet from dropping. Press the ▲button again when you are ready to remove the paper .
2. Pull the sheet straight forward to remove it.
Note
•If you do not remove POP Board by pulling it straight forward, the printed surface may become
scratched.
3. Press the ▼button.
Caution
•After removal, press the ▼button. If you do not remove the paper before doing subsequent
operations, the sheet may go back inside the printer , leaving roller marks across the trailing edge of
paper .
196 Handling Paper