Control Panel
System Setup
Setting Item Description, Instructions
Buzzer Set the buzzer . Choose On for the buzzer to sound in case
of errors.
W arning
Detect Mismatch Choose W arning for notication (display of a warning
message) during printing if the paper type specied in
the printer menu does not match the paper type in the
printer driver . Choose None to continue to print without
notication. Choose Pause to have printing paused under
these circumstances. In this case, you can continue printing
by pressing the Online button.
Keep Media Size Choose On to use the paper size setting as the basis for
printing instead of other settings. The margin setting of the
printer menu will be used instead of the margin setting of the
printer driver if the latter is smaller , which may prevent text or
images in the margin from being printed. Choose Off to use
the printer driver settings instead. Even if the margin setting
of the printer driver is smaller than that of the printer menu,
text or images will not be cut of f. However , this requires
longer paper because the actual margin will be equal to the
margin setting of the printer driver plus the margin setting of
the printer menu.
PaperSize Basis Sht Selection If sheet size detection is activated, choose whether ISO
A3+ or ANSI B Super is applied when an inbetween size is
detected.
Roll Selection1 If roll size detection is activated, choose whether ISO A3
(297mm) and 300mm Roll is applied when an inbetween
size is detected.
Roll Selection2 If roll size detection is activated, choose whether 10in.
(254mm) or JIS B4 (257mm) is applied when an in between
size is detected.
T rimEdge Reload Keeping a roll in the printer for a long time without printing on
it may leave a depression on the leading edge.
When printing quality is most important, we recommend
setting this option to On so that the paper edge is
automatically cut before printing.
Nozzle Check Specify the timing for automatic checks of nozzle clogging.
Choose Off to disable checking. Choose 5 pages to check
after every 5 pages are printed. Choose 10 pages to check
once after every ten pages are printed.
Sleep T imer Specify the period before the printer enters sleep mode.
Length Unit Choose the unit of measurement when roll length is displayed.
Y ou can switch the unit displayed for Roll Length Set and the
remaining paper amount displayed in the submenu.
T ime Zone Specify the time zone. T ime zone options indicate a main city
in this time zone and the dif ference from Greenwich Mean
T ime.
Date Format Specify the date format.
Printer Parts 55