Messages regarding paper
Cutting Error
Cause Corrective Action
There are sheets left on the Output T ray . Remove the paper .
There is a foreign object by the Output T ray ,
obstructing the Cutter Unit .
Remove the foreign object.
Y ou are not using the printer under the recommended
environmental conditions for the paper .
Use the printer only where the recommended
environmental conditions for the paper are met.
Note that various environmental conditions are
recommended for various types of paper . For details
on the recommended environmental conditions for
paper , see “T ypes of Paper”. (→P .107)
Y ou are using paper that is not compatible with
automatic cutting.
Cut the roll manually .
( → P .130)
The Cutter Unit stops in the middle of cutting. Move the Cutter Unit to the left, and then remove the
roll paper . If the roll cannot be cut using the Cutter
Unit , cut the roll manually .
( → P .130)
In other cases, the Cutter Unit may be damaged. Contact your Canon dealer for assistance.
Roll P Unit / Please Check
Cause Corrective Action
Change the paper source in the printer driver to a
source other than roll, and then try printing again.
The printer has received a print job that species
rolls, but the Roll Feed Unit is not installed.
Install the Roll Feed Unit and resend the print job.
748 Error Message