Handling rolls
Detection of the Remaining Roll Paper
If you have activated automatic detection of the remaining roll paper , when the roll is ejected, a barcode with text is
printed on the roll paper that identies the type of paper and amount left. If this function is activated and barcodes
are printed on the roll paper , the type of paper and amount left are automatically detected when you load a
roll. The barcode will be cut of f after it has been read.
Note
•If the document is not cut but kept in the printer , only the text message is printed. This is also the
case when printing on 8-inch rolls or clear lm.
Important
•If the barcode on the roll is not detected, enter the type and length of paper on the Control Panel .
Follow these steps to activate detection of the remaining roll paper .
1. Press the Menu button to display MAIN MENU .
2. Press ◄or ►to select Paper Settings , and then press the ▼button.
MAIN MENUPaper Settings ↓
3. Press ◄or ►to select Chk Remain.Roll , and then press the ▼button.
Paper Settings
Chk Remain.Roll ↓
4. Press ◄or ►to select the On , and then press the OK button.
Chk Remain.Roll
On
The setting is updated, and an equals sign “=” is displayed at left.
Chk Remain.Roll
= On
5. Press the Online button to bring the printer online.
Handling Paper 127