Handling sheets for paper feed slots
Selecting the Paper Size (T ray)
T o change the paper size after paper has been advanced, select the paper size as follows.
Note
•After you press the Feeder Selection button to illuminate the Paper T ray lamp , a screen is displayed for
selection of the paper type. Press ◄or ►to select the paper type, and then press the OK button. Next,
a screen is displayed for selection of the paper size. Press ◄or ►to select the size of paper , and then
press the OK button. The printer is now ready to advance the paper .
•If you have sent the print job from a computer beforehand, the screen for paper type and size selection
is not displayed. Printing will start after the paper is advanced.
1. Press the Menu button to display MAIN MENU .
2. Press ◄or ►to select Paper Settings , and then press ▼.
MAIN MENUPaper Settings ↓
3. Press ◄or ►to select Manual Pap.Size , and then press ▼.
Paper Settings
Manual Pap.Size ↓
Note
•Manual Pap.Size is not displayed unless paper is loaded in the T ray .
Handling Paper 193