Cannot print over a network
Conguring the Communication Mode Manually
This topic gives instructions for conguring the communication mode manually .
1. Press the Menu button to display MAIN MENU .
2. Press ◄or ►to select Interface Setup , and then press ▼.
MAIN MENUInterface Setup ↓
3. Press ◄or ►to select Ethernet Driver , and then press ▼.
Interface SetupEthernet Driver ↓
4. Press ◄or ►to select Auto Detect , and then press ▼.
Ethernet DriverAuto Detect ↓
5. Press ◄or ►to select Off , and then press OK .
The setting is updated, and an equals sign “=” is displayed at left.
Auto Detect
= Of f
Return to the Ethernet Driver menu.
6. Press ◄or ►to select Comm.Mode , and then press ▼.
Ethernet DriverComm.Mode ↓
7. Press ◄or ►to select the communication mode, and then press the OK button.
The setting is updated, and an equals sign “=” is displayed at left.
Comm.Mode
= Half Duplex
Return to the Ethernet Driver menu.
T roubleshooting 691