Network Setting
8. Press ◄or ►to select the number , and then press the OK button.
IP Address
=xxx.0.0.0
Note
•Pressing the ◄button decreases the number by 1. The minimum value is “0,” after which “255” is
displayed.
•Pressing the ►button increases the number by 1. The maximum value is “255,” after which “0” is
displayed.
•Hold down ◄or ►to increase or decrease the value continuously .
9. Repeat steps 6-8 to enter the IP address assigned to the printer .
IP Address
=xxx.xxx.xxx.xxx
10. Press the Online button to bring the printer online.
If any of the settings are changed, a message for conrmation is displayed. In this case, press
the OK button.
Note
•If an error message is displayed, check the settings and correct any invalid values.
•T o cancel the setup process, hold down the Stop/Eject button for a second or more.
Important
•Be sure to complete step 10. This will activate the values you have entered.
•Y ou can also specify the subnet mask and default gateway on the Control Panel .
576 Network Setting