Handling sheets
Selecting the T ray as the Paper Source
Y ou can switch between manual and auto paper feed methods by pressing the Feeder Selection button.
The Auto Feed lamp is lit when feeding paper automatically , and the Paper T ray lamp is lit when feeding
paper manually .
When loading paper in the tray , you must specify manual feed. Press Feeder Selection to activate the
Paper T ray lamp (a).
Caution
•Paper jams may occur if you load paper other than the paper specied in the paper settings for the
media source. If you insert the edge of a roll in the Paper Feed Slot after you have selected sheets as
the type of paper in the media source on the Control Panel and specied the type and size of paper ,
the printer will prepare to print on the roll. If you print under these conditions, an error will occur when
the roll is ejected. ( → P .747)
Note
•Y ou cannot switch the paper source in the following situations:
•If the Message lamp is ashing
Check the message on the Display Screen and take action as necessary . ( → P .729)
•If the Data lamp is ashing
Select the paper source after printing is nished.
•If a printer menu operation is in progress
Select the paper source after the operation is nished.
After the Paper T ray lamp is lit, the printer automatically shows a menu for selection of the paper type on the
Display Screen .
And then specify the paper type. ( → P .168 )
Handling Paper 155