Canon 3555B001AA, 3556B001AA NOTE, Menu, Menu, Settings, Settings, Settings, Settings, Functions, Incoming Ring, Timer Settings, System Settings, System Settings, Remote Receiving

NOTE- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Check the settings for the recipient's machine also

The ECM function is available only when the setting for the machine and recipient's machine are enabled.

Even if the ECM function is enabled

An error may occur due to the telephone line.

When the ECM function is enabled

It may take time to receive documents if a problem occurs with the telephone line.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Manual/Auto Switch

You can configure the machine so that it starts receiving documents after ringing for a certain time when <Receive Mode> is set to <Manual>.

How to display the settings

[] → <Send/Receive Settings> → <Fax Settings> → <Receive Settings> → <Manual/Auto Switch>

Settings

(Boldface: Default settings)

How to display the settings

[ ] → <Send/Receive Settings> → <Fax Settings> →

→

Off

Does not receive documents automatically.

Incoming Ring Time: 1 to 15

Starts receiving when the time

Settings

(Boldface: Default settings)

Off	Does not use the ECM function.

On Uses the ECM function.

Incoming Ring

You can specify whether an incoming call for the external telephone rings when <Receive Mode> is set to <Auto> or <Fax/Tel>.

You can also specify the number of ringing times.

How to display the settings

[ ] → <Send/Receive Settings> → <Fax Settings> → <Receive Settings> → <Incoming Ring>

Settings

(Boldface: Default settings)

Off	The telephone does not ring.

Onspecified in <Incoming Ring Time> has to 99 (seconds)

elapsed.

System settings procedure

Specify the system settings using the following procedure. This section describes the procedure for changing the setting for [Send Start Speed] as an example.

Keys to be used for this operation

Fax the Using

Ring Times: 1 to 2 to 99

The telephone rings.

OnYou can specify the number of ringing (times)

times in <Ring Times>.

Remote Receiving

If an external telephone is connected, you can switch to the fax receiving mode immediately by dialing the ID number for fax receiving using the dial buttons of the telephone during a phone call.

How to display the settings

[ ] → <Send/Receive Settings> → <Fax Settings> → <Receive Settings> → <Remote Receiving>

Settings

(Boldface: Default settings)

Off		Disables the remote receiving function.

	Remote Receive ID:	Enables the remote receiving function.
On	00 to 25 to 99	You can specify an ID number for fax receiving in
	(times)	<Remote Receive ID>.