Canon 3555B001AA, 3556B001AA FAX, Fax, Fax, Fax, NOTE, 012P, Pause, Start, Press, 012XXXXXXT, 012p031XXXXXX, 012XXXXXXT3456, Telephone call, Start Receiving, Start Receiving

Functions Fax the Using

4 After responding to the recoded message of theinformation service, press [ ] (Tone).

You can switch to the tone signal.

Specify destination. 2010 01/01 12:52AM

012XXXXXXT

Start Receiving

Resolution: 200 x 1...

5 Use the numeric keys to enter the required numbers for the information service.

Specify destination. 2010 01/01 12:52AM

012XXXXXXT3456

Start Receiving

Resolution: 200 x 1...

6 If you want to send faxes, press [ ] (B & W).

NOTE- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Telephone call

The external telephone must be connected to this machine.

Check the dial tone before entering a fax number.

If you enter the number before checking the dial tone, the call may not be connected or the wrong number may be dialed.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Sending a Fax Abroad (Adding Pauses)When sending a fax abroad, you may need to insert a pause within the number.

When communicating abroad, the signal distance is extreme and the signal route complicated. Because of this, you may not be able to connect to a recipient by dialing an international telephone identification number, country code, and the recipient's fax number at the same time. In this case, add a pause after the international telephone identification number. Because adding a pause provides a point where wait time can be added when dialing, it is easier to connect to the recipient.

Keys to be used for this operation

Pause FAX Numeric keys

Start

1 Place documents on the platen glass or load them in the feeder.

"Placing Documents" (→P.2-4)

"Documents Requirements" (→P.2-2)

2
	Press [	].
3	Set scanning settings for documents as needed.
	"Fax Settings" (→P.6-3)

4 Use the numeric keys to enter the international access code.

For details on international access codes, contact the telephone company you are subscribed with.

Fax

012

5 Press [ ] (Pause) to enter a pause as needed.

•The letter <p> indicating a pause is displayed.

•A pause in the number represents a 2-second pause. To change the pause time, see "Pause Time" (→P.6-23).

•When you are adding pauses consecutively, press [ ] (Pause) again.

Fax

012P

6 Enter the country code, the area code, and the fax/telephone number using the numeric keys.

Fax

012p031XXXXXX

6-8