Canon 3555B001AA, 3556B001AA Configuring Using the Remote UI, Security Settings, Various Network Settings, Quick View- Perform Useful Tasks, e-Manual, with a computer, Sending Functions

Quick View- Perform Useful Tasks

Copy Print Fax Scan Network Settings & Remote UI

There are a variety of network settings that are explained in the e-Manual. Since the machine has a built-in network board, you can print, fax, and scan from a computer via a network. You can also perform efficient management by configuring the machine using the Remote UI.

Below is a quick overview of highlighted network settings that you can utilize in your everyday use.

Various Network Settings

For details, see "Network Settings" in the e-Manual.

Basic Network Settings

Setting the IP address (IPv4)

-IP address

-Subnet mask

-Gateway address

As needed

Setting the IP address (IPv6)

Configuration for communicating	Miscellaneous Settings
with a computer
Configuring the machine	Communication mode/
- LPD, RAW, WSD	Communication speed
	Waiting time for connection
As needed
	DNS
Configuring a computer
	WINS server
- Port settings
- Sharing settings for the printer

Security Settings For details, see "Security" in the e-Manual.

Administration Settings	Restricting Network Connection	Restricting Destination Operations/
		Sending Functions
System administrator settings	SNMP settings	Address book PIN
- Manager ID/PIN	Allowing the HTTP communication	Restricting new destinations
Device information	Setting a port number	Restricting the PC fax
- Device name/Installation site		Restricting sending from history
Dept. ID management		Fax number confirmation re-entry
- Department ID/PIN/		Restricting sequential broadcast
Function restriction		Restricting displaying the job history
- Unknown ID job management
		Restricting memory media
Remote UI On/Off
		Restricting USB connection

Configuring Using the Remote UI For details, see "Setting and Managing from Computer" in the e-Manual.

Remote UI Functions

Checking the status and information of the machine

Job Management

System settings

Forwarding settings

Department ID management Address book management

Device settings

How to start the Remote UI

1Start the web browser.

2Enter "http://<the IP address of the machine>/" in the address field, and then press the [ENTER] key on your keyboard.

e-Manual → Starting the Remote UI

3Log on to the Remote UI.

(1)Select [System Manager Mode] or [End-User Mode].

(2)For [System Manager Mode], enter [System Manager ID] and [System Manager PIN]. For [End-User Mode], enter [User Name].

(3)Click [OK].

(1)

(1) (2)

(3)